SMART CUT® 16001
Cut Off Saw
SMART CUT® 16001 are entry level laboratory cutting saw that are very affordably priced, Fast & Accurate sectioning of large variety materials. Coolant is stored below and applied to sample by rotating the blade. Saw table has a large working area and no inhibiting lip. Bull dog grip vise holds all material shapes and swings back out of the way for hand sectioning. Front shield protects operator from cutting waste.
Trusted by Tens of Thousands of Manufacturers, Laboratories,
Research Institutions Worldwide Since 1990
SMART CUT® 16001 are entry level laboratory cutting saw that are very affordably priced, Fast & Accurate sectioning of large variety materials. Coolant is stored below and applied to sample by rotating the blade. Saw table has a large working area and no inhibiting lip. Bull dog grip vise holds all material shapes and swings back out of the way for hand sectioning. Front shield protects operator from cutting waste.
Heavy welded steel chassis with separately welded inner frame to eliminate warp. One piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads. Quick return system which allows carriage to be manually returned to any position. Over-running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through specimen. Made in U.S.A.
- Powder Coated, Heavy Welded, Steel Chassis
- Sawmill Type Carriage Glides on Steel Ways
- 4″ Cross Feed Adjusts 1/16″ per Turn for Uniform Slabbing
- Light Enough to Be Moved Easily, Yet Heavy Duty Enough for Every Day Use
- Easily Converts from Slab Saw to Trim Saw with Drop In Table
- Rigid Grip Vise: Steel Jaw Tongue Contacts Full Length of Vise, Holding Jaw Square so It Cannot Bind
- Complete with Leg Stand
- Most Affordable Entry Level Lab Cutting Saw on Market Today
- Reduce Consumables Cost by up to 300%
- Equal or Better Cut Quality on most Applications to Fully
- Automatic Sectioning Saws, at small Fraction of cost.
- No Material Deformation
- Can withstand more exploitation that conventional precision sectioning saws
- Very Easy to use (reduce operator error & training)
- Can be used for just about any material or application
- Very compact, requires minimum space
- Powerful motor designed for cutting very hard to soft materials
- Straight forward design allows the operator to concentrate on sectioning samples, not operating the machine
- Perfect for Manufacturing and R & D Organizations on a Budget
INDUSTRIES USED IN:
- Advanced Ceramics
- Composites
- Glass
- Geology
- Quartz
- Materials Research
- Medical Devices
- Metallography
- Photonics / Optics
- Semiconductor
Ferrous & Non-Ferrous Metals:
- Plain Carbon Steels
- Electronic Packages
- Stainless Steels Plastics
- Tool Steels Fasteners
- Aluminum Refractories
- Copper Base Alloys Integrated Circuits
- Magnesium Thermal Spray Coatings
- Titanium Metal Matrix Composites
- Biomedical Wafers
- Petrographic
- PCB.s Ceramics
Download Operating Manuals
OPTIONAL RECIRCULATING COOLANT SYSTEM
The Complete Submersible Pump/Tank is a self-contained pump system that can eliminate city water hook-up for grinding units or supply mixed coolant and light mineral oil to these saws. This unit has a large capacity tank with two graduated dividers to separate sediment, and 10′ of 3/8″ vinyl tubing. Wheels on the tank make moving it easy. All pumps operate on 110V, are supplied with 3 prong grounded plug and cord (CSP805), and pump 200GPH at 1 ft., 105GPH at 5 ft. The tank holds approximately 17.5 gallons.
$350.00Add to cart
SMART CUT® COOLANTS
Your choice of one (1) quart of SMART CUT™ Water Soluble Coolant or Mineral Oil is included with machine. SMART CUT™ Water Soluble Coolant Reduces material thermal stress, edge damage, and internal cracking, increases blade life, provides better cut quality, preserves material micro structure
Hence, assuring long-term integrity of material being sectioned. Since SMART CUT coolant is both a coolant and lubricant, both the wafering blade and material benefit. Mix ratio is 1:20 (1 part coolant, 20 parts water) on very hard and dense materials and 1:40 (1 part coolant, 40 parts water) on softer materials. Depending on mix ratio 1 quart will produce 5.7 to 9 gallons of coolant when mixed with water. As a coolant, SMART CUT KOOL reduces heat caused by friction. As a lubricant, SMART CUT KOOL lowers friction and surface tension, which increases swarf dispersion.
LARGEST SELECTING OF DIAMOND &
CBN WAFERING BLADES AVAIALBLE
one (1) diamond wafering blade any specification is included FREE OF CHARGE with purchase of any machine (any specification). we have almost unlimited number of diamond & CBN wafering blade specifications in stock available for immediate delivery. Available in different sizes, thickness, arbor sizes, diamond concentrations, diamond mesh sizes, and bond hardness’s. With several thousand unique blade specification in stock not listed on our standard stock program. This insures you will receive the best blade specification possible for your specific application.
THE RIGHT DRESSING STICK FOR YOUR APPLICATION
One (1) dressing stick is included with the purchase of any machine free of charge. The dressing stick we supply is similar to the diamond size of the wafering blade you have chosen (or we recommended) for your application. Wafering Blades must be diamonds particles/crystals exposed properly through frequent dressing. Otherwise, the diamond tool will glaze over. They will begin to tear rather than grind which is very destructive. Tearing caused from unexposed diamonds creates friction. This causes uneven wear and/or heat cracks in the wafering blade and/or material being cut. Resulting in premature blade wear, blade tensioning problems, and will eventually destroy the blade. The more frequently the blade is dressed the freer and cooler it will cut with lot more consistency.
