Shop
SMART CUT® Double Row Diamond Cup Wheel
SMART CUT® Drilling Templates
SMART CUT® Fine Grinding (Fixed Abrasive) Plates
SMART CUT® Fully Sintered (Metal Bond) Diamond & CBN, Wafering Blades
SMART CUT® Fully Sintered (Metal Bond) diamond wafering blades are fully sintered from OD to ID of the blade. Meaning they have diamonds completely impregnated through the blade. Unlike standard diamond & cbn wafering blades with steel core and diamond section. Instead of having a steel core and small diamond bond edge (usually 1/8"/3.2mm). The diamond edge is all the way through the blade, from its Outside Diameter to Inside Diameter of the blade. You can use until the entire Outside Diameter of the blade is consumed.
Smart Cut® Glass Blade
SMART CUT Fully Sintered (Metal Bond) diamond wafering blades are fully sintered from OD to ID of the blade. Meaning they have diamonds completely impregnated through the blade. Unlike standard diamond & cbn wafering blades with steel core and diamond section. Instead of having a steel core and small diamond bond edge (usually 1/8"/3.2mm). The diamond edge is all the way through the blade, from its Outside Diameter to Inside Diameter of the blade. You can use until the entire Outside Diameter of the blade is consumed.
SMART CUT® HD Synthetic Low IFT Coolant/Lubricant For Diamond Wire Sawing Silicon
SMART CUT-HD is an aqueous based also insure prolonged diamond life. SMART synthetic formulation developed to optimize CUT-HD foam-free characteristic ensures cropping and squaring of silicon ingots using compatibility with all filtration systems. diamond wire. SMART CUT-HD allows the diamond wire to saw properly through the The product is odor free, safe and silicon by penetrating through the kerf and biodegradable. As an added benefit, wetting the Si/Diamond/Nickel interface the coolant keeps the debris generated from the saw soft and easier to clean keeping surfaces free cutting and clean. than conventional products reducing The matrix in which the diamond is contained maintenance and machine down-time. is also lubricated and cleaned allowing for consistent sustainable cutting at higher SMART CUT-HD may also be used as an speeds typical of diamond wire saws. Heat edge-grinding and surface grinding coolant/lubricant in re-circulating coolant systems. transfer characteristics of the diluted product SMART CUT HD moldecules have a hdropoboic (water hating) end that bonds to silicon and a huprodphilic (water loving) end that bonds to water. This enables water to wash away loos particles and reduces surface tension allowing the water to thoroughly wet the material being cut.
SMART CUT® HIGH PRECISION GRINDING / POLISHING HEAD
