INDUSTRIES USED IN:
Ferrous & Non-Ferrous Metals:
PLC with Advance Graphical Touch Screen Display with pre set programs & Data Storage upto 25 programs
Automatic carbide rod loading with servo system
In built movable recirculation coolant tank with 1/2 HP coolant recirculation pump
Additional Safety Feature where the Door cannot be opened unless the Cutting process is stopped
This helps to recirculate the fume caused while cutting into coolant. Gives clear vision on cutting process and also avoid human health hazards
Additional Safety Feature to stop the Motor and the cutting wheel immediately once the Cutting is stopped
Magnet filter for filtering Coolant Sludge and send clean Coolant Oil to the Recirculation tank
Reduces the machine tool operator’s time and effort handling raw material & Provides consistent, reliable operation that enables lights-out production
During Maintenance and Break Downs the Loto Switch can be switched off and locked with the tag key. This prevents from switching on the machine by mistake and avoids damage
In the event of failure of one phase, this unit will stop the Machine and protects the motor from overheating and failure
Your choice of one (1) quart of SMART CUT™ Water Soluble Coolant or Mineral Oil is included with machine. SMART CUT™ Water Soluble Coolant Reduces material thermal stress, edge damage, and internal cracking, increases blade life, provides better cut quality, preserves material micro structure
Hence, assuring long-term integrity of material being sectioned. Since SMART CUT coolant is both a coolant and lubricant, both the wafering blade and material benefit. Mix ratio is 1:20 (1 part coolant, 20 parts water) on very hard and dense materials and 1:40 (1 part coolant, 40 parts water) on softer materials. Depending on mix ratio 1 quart will produce 5.7 to 9 gallons of coolant when mixed with water. As a coolant, SMART CUT KOOL reduces heat caused by friction. As a lubricant, SMART CUT KOOL lowers friction and surface tension, which increases swarf dispersion.
one (1) diamond wafering blade any specification is included FREE OF CHARGE with purchase of any machine (any specification). we have almost unlimited number of diamond & CBN wafering blade specifications in stock available for immediate delivery. Available in different sizes, thickness, arbor sizes, diamond concentrations, diamond mesh sizes, and bond hardness’s. With several thousand unique blade specification in stock not listed on our standard stock program. This insures you will receive the best blade specification possible for your specific application.
One (1) dressing stick is included with the purchase of any machine free of charge. The dressing stick we supply is similar to the diamond size of the wafering blade you have chosen (or we recommended) for your application. Wafering Blades must be diamonds particles/crystals exposed properly through frequent dressing. Otherwise, the diamond tool will glaze over. They will begin to tear rather than grind which is very destructive. Tearing caused from unexposed diamonds creates friction. This causes uneven wear and/or heat cracks in the wafering blade and/or material being cut. Resulting in premature blade wear, blade tensioning problems, and will eventually destroy the blade. The more frequently the blade is dressed the freer and cooler it will cut with lot more consistency.
No account yet?
Create an Account
