9 am to 6 pm PST time
No products in the Quote Basket.
A fully automatic cutting machine used for mass production. This is widely use for cutting carbide, glass, ceramic, quartz rods, and tubing
This machine is also well suited for cutting studied and planned to solve any cutting matter for hard metal bars manufacturers, tool grinders, and tools manufacturers (milling cutters for metal, cutters for wood, taps, reamers, carbide tips, punches,
dies, brazed tools, blades for planes, carbide components, etc..) and special tools manufacturers.
The main feature of such cutting machine is the cutting precision and the easy setup to adjust the shape. The cutting machine has been designed to carry out both automatic single cut and automatic production ones, with bar-loaders allowing autonomous cut management, without any operator. The cutting machine can automatically work various diameters and different lengths on the same bar, by optimizing the cutting quantity of each bar so that waste is very little or even nonexistent.
INDUSTRIES USED IN:
Ferrous & Non-Ferrous Metals:
Magnet filter for filtering Coolant Sludge and send clean Coolant Oil to the Recirculation tank
Additional Safety Feature where the Door cannot be opened unless the Cutting process is stopped
This helps to recirculate the fume caused while cutting into coolant. Gives clear vision on cutting process and also avoid human health hazards
To clean the Bottom base bed Automatically while cutting and you can save operator Cleaning time
Advanc graphical touch screen display with pre set programming and data storage upto 25 programmes
Automatic carbide rod loading with servo system
Your choice of one (1) quart of SMART CUT® Water Soluble Coolant or Mineral Oil is included with machine. SMART CUT® Water Soluble Coolant Reduces material thermal stress, edge damage, and internal cracking, increases blade life, provides better cut quality, preserves material micro structure
Hence, assuring long-term integrity of material being sectioned. Since SMART CUT coolant is both a coolant and lubricant, both the wafering blade and material benefit. Mix ratio is 1:20 (1 part coolant, 20 parts water) on very hard and dense materials and 1:40 (1 part coolant, 40 parts water) on softer materials. Depending on mix ratio 1 quart will produce 5.7 to 9 gallons of coolant when mixed with water. As a coolant, SMART CUT KOOL reduces heat caused by friction. As a lubricant, SMART CUT KOOL lowers friction and surface tension, which increases swarf dispersion.
one (1) diamond wafering blade any specification is included FREE OF CHARGE with purchase of any machine (any specification). we have almost unlimited number of diamond & CBN wafering blade specifications in stock available for immediate delivery. Available in different sizes, thickness, arbor sizes, diamond concentrations, diamond mesh sizes, and bond hardness’s. With several thousand unique blade specification in stock not listed on our standard stock program. This insures you will receive the best blade specification possible for your specific application.
One (1) dressing stick is included with the purchase of any machine free of charge. The dressing stick we supply is similar to the diamond size of the wafering blade you have chosen (or we recommended) for your application. Wafering Blades must be diamonds particles/crystals exposed properly through frequent dressing. Otherwise, the diamond tool will glaze over. They will begin to tear rather than grind which is very destructive. Tearing caused from unexposed diamonds creates friction. This causes uneven wear and/or heat cracks in the wafering blade and/or material being cut. Resulting in premature blade wear, blade tensioning problems, and will eventually destroy the blade. The more frequently the blade is dressed the freer and cooler it will cut with lot more consistency.
Signup for email offers, updates, and more
25205 & 25201 Avenue Tibbits Valencia CA 91355 USA
Phone : (661) 257-2288
FAX : (661) 257 -3833
lel@ukam.com
UKAM Industrial Superhard Tools is a U.S. High Technology, Specialty Diamond Tool & Equipment manufacturer. We specialize in producing ultra thin & high precision cutting blades and precision cutting machines diamond drills, diamond micro tools, standard & custom advanced industrial diamond tools and consumables.
Shipping Methods
Safe & Secure Payments
© Copyright 1990-2024. UKAM Industrial Superhard Tools – Terms of Use
Signup for email offers, updates, and more
25205 & 25201 Avenue Tibbits Valencia CA 91355 USA
Phone : (661) 257-2288
FAX : (661) 257 -3833
lel@ukam.com
UKAM Industrial Superhard Tools is a U.S. High Technology, Specialty Diamond Tool & Equipment manufacturer. We specialize in producing ultra thin & high precision cutting blades and precision cutting machines diamond drills, diamond micro tools, standard & custom advanced industrial diamond tools and consumables.
Shipping Methods
Safe & Secure Payments
© Copyright 1990-2024. UKAM Industrial Superhard Tools – Terms of Use
No products in the Quote Basket.
No account yet?
Create an AccountSign up to receive exclusive usage recommendations, Illustrated Trouble Shooting Guides & Sales
