Leading Ultra Thin Diamond Blade Manufacturer

Search By

Diamond Blade Type

Material Being Cut

Industry/Application 

Equipment Used On

Precision Saws

Blade Accessories
Support

Select Right Blade for your Application

How to Property Use Diamond Blades 

Diamond Blade Guide

How to Properly Use Diamond Tools

Troubleshooting Sawing Problems

Application Data Sheet

Other Products
Diamond Blades 
Dicing Blades
Wafering Blades
Diamond Drills
Diamond Wheels
Diamond_Laps  
Band Saw Blades  
Other Diamond Products   
Diamond Tool Accessories  
Diamond Machining Equipment
Service
Diamond Slicing 
Diamond Dicing   
Drilling & Micro Drilling
Diamond Machining
Consulting, Process Development
Company
About Us   
What We Offer 
Visit_Us 
Research & Development 
Custom Manufacturing
Contact Us
Employment
What's New
Achievements
Social Responsibility
Technologies
SMART CUT™
HYBRID Bond™
Sintered (Metal Bond)
Electroplating / Diamond Deposition

Recommend Us

to Friend/Colleague

APPLICATION SUPPORT

Getting the Most from your Diamond Tools (171kb)
Getting the Most from your Diamond Sawing Operation (125kb)
Select the Right Diamond Blade for your Application (151kb)
SMART CUT™ technology (761kb)
Get Adobe Reader

Diamond Gang Saw Model 5996

  

FREE Advice / Consultation >>> 

SPECIFICATIONS

Maximum uncut tube length:

59.0" +/- 0.25"

Minimum cut length:

0.100"

Maximum tube diameter:

0.40"

Minimum tube diameter: 

0.100"

Production rate:
Loading System:

Hopper Fed.  Manual Loading. 30 min cap.

Unloading System:

Gravity Discharge.  Custom interfaces available.

Cutting Wheels:

3.0" x .020" x 1-5/8" Diamond Cutoff

Dimensions:

96" x 33" x 48" (L x W x H)

Weight:

2000 lbs

Power:

220/480 3Ph VAC, 30A

Coolant:

Water @ 10gpm, additive optional

Air:

90 psi, <1.0 scfm

  Features:    

Uncut tubes are loaded into a hopper, the transported automatically between the feed roller and holding sheet.   Multiple cutting wheels pass through slots in the holding sheet and cut each tube. This assures that the cutting action is always from the outside of each tube toward its center.  This minimizes chipping or burring of the cut parts. 

  • Saws can be modified to better fit customers needs

  • Increase Production

Made in U.S.A.

 

SMART CUT™

Expect MORE from your tools.

                                Advantages:   
  • NO POTTING REQUIRED!

  • Production rates range from 400 to 6000 parts per minute

  • Multi-Blade cutting system makes all cuts simultaneously and automatically separates end cuts from finished pieces.

  • Capable of cutting tubes or rods of glass, quartz, carbon, ceramics, plastics, fibre glass, hybrid and exotic materials and most metals.  If it is a rod or a tube it can be cut on this system!

  • Simple, hopper fed operation allows one person to operate multiple machines.

  • Normal length tolerance is +/- .002". Squareness is +/- 1.0 degrees.

  • Stock material diameters currently range from 0.030" to 3.0".

  • Uses water as a coolant.  Can also use additives and lubricants as desired

 

 

 

 

What you should know before you buy your next diamond blade?

 

 

 

 Recommend Site to Friend / Colleague


UKAM Industrial Superhard Tools   Division of LEL Diamond Tools International, Inc.

25345 Avenue Stanford, Unit 211  Valencia, CA 91355  Phone: (661) 257-2288  Fax: (661) 257-3833

e-mail: lel@ukam.com

Terms of Use

© Copyright 2002-2004. UKAM Industrial Superhard Tools. No portion of this web page or its designs, images, and logos may be reproduced in any form without written permission from UKAM Industrial Superhard Tools.