Diamond Core Drills for Advanced / Technical Ceramics

Scroll Down & Click on the Diamond Drill name or picture below, to see Additional Information, Prices, & Purchase Online.   

Electroplated Multi-Layered (nickel bonded) core drills available from inventory in 1/8" to 3" Diameter. Are the least expensive drills. Perfect for small drilling requirements, soft to medium hard materials ceramic materials such PZT, porcelain. Drilling Life: 350+ holes on most materials.  more >>>

Used in high production, and R & D applications. Manufactured in many different specifications, outside & inside diameters, drilling depths, bond types, diamond mesh sizes, mountings, and tolerances. Manufactured to better fit your specific needs & requirements.  more >>>

Designed for drilling ultra hard & brittle materials Available from inventory 1/8" to 6" OD. Will work on just about any advanced ceramic & new generation materials. Most widely used & preferred diamond drills for advanced ceramics. Drilling Life: 2,000+ holes on most materials.   more >>>

Thin Wall Multi-Layered Electroplated Diamond Core Drills. Provides less loss of material, smoother material surface finish, less chipping & minimizing mater structure deformation associated with drilling. Prefect for Small Production, R & D, of full range of Soft to Medium Hard Advanced Ceramics. Available from inventory in various diameters from 3/16" to 2-1/2".   more >>>

Thin Wall Sintered (Metal Bond) Diamond Core Drills provide precision drilling performance on alumna, glass, quartz, ruby, sapphire, yag, silicon, fused quartz, bk7, non-metallic materials where minimum loss of material & exact tolerances are critical.         more >>>

THIN WALL SINTERED (METAL BOND) Diamond Core Drills - Wall Thickness: 0.5mm (.0196") provide, long lasting, faster drilling (RPM), and minimum heat generation performance. All drills are available with either 5/8-11" female thread to fit water swivel adapter Model 5811 or 1/2" gas male thread (Belgium mount) to fit water swivel adapter Model 12GF. Available from inventory in various diameters from 1/8" to 2-1/2".   more >>>

Electroplated & Metal Bond Diamond Solid Thin Drills are available from inventory in 0.75mm to 2.5mm. Used for large variety of technical ceramics, & many other advanced materials. Used on: Foredom, Dremel Machines, High Speed Air Spindles, & other equipment running at 9,000+ RPM. more >>>

Micro Diamond Drills are available from .001" to .035" in diameter (25 microns and up). Provide most precision drilling performance on alumina, glass, ruby, sapphire, yag, silicon, fused quartz, bk7 and many other materials. Natural Diamond is used for most advanced & optical types of materials. CBN (cubic boron nitride) for materials with high metallic content.  more >>>

Water Swivel Adapters (Drill head assemblies) & Shank Adapters to provide high pressure of coolant through center of your drills. Increase life of your drills up to 75% & improve surface finish. Available from inventory for any type of drilling equipment.  more >>>

When added to water SMART CUT™ synthetic water soluble coolant or Mineral Oil will improve your overall diamond drilling operation by as much as 30%. Plain water evaporates at 212 F. Temperature at drilling zones reaches 500 F.  Water evaporates, before it cools diamond drill & Material. Resulting in shorter Diamond Drill Life, Material Damage or micro cracks associated with overheating. Improve Drilling Speed, Increase Drill Life, Improve Surface Finish, Minimize Chipping, Reduce Cracking  more >>>

Diamond Bottoming / Non Coring Drills

Diamond Bottoming Drills/Tools are used for making Blind Holes in all types of material ranging in hardness. Works by grinding the bottom and inside of the hole to a flat surface. Bottoming tool does not have a core. Used in conjunction with sintered (metal bond) diamond core drill as two step operation. more >>>

Dressing Sticks

Sintered (Metal Bond) Diamond Drills should be periodically dressed, in order to rexpose new diamonds. Otherwise, the diamond tool will glaze over. They will begin to tear rather than grind which is very destructive. Tearing caused from unexposed diamonds creates friction. This causes uneven wear and heat cracks in the diamond tool as well as material being drilled. Resulting in premature diamond tool wear, blade tensioning problems, and will eventually destroy the diamond tool. The more a diamond drill is dress the faster and more consistently it will drill.    more >>>

                            FREE Advice/Consultation >>>

Just about any type of Diamond Drill can be made for your specific material / application. Here a few examples of diamond drills we have made before to better fit the customers application.           more >>>

Ultra Thin Wall Diamond Core Drills

Diamond Core Drill Wall thickness as thin as .003" (.076mm) 76 microns. Focus on either OD or ID with close tolerances of .005" and better can be manufactured. To better fit your exact application.

Diamond Carving Points

Sintered (Metal Bond)

Designed for carving a wide range of ultra hard to soft material into intricate shapes. Over 200 different shapes are available from you to choose from. We also have capability to manufacture any shape, type, size diamond carving points based on your specifications or drawings.  more >>>

CUSTOM / SPECIALTY DIAMOND CORE DRILLS

Can't find what you are looking for? Let us know. UKAM Industrial Superhard Tools has the capability to manufacture virtually any type of diamond core drills for any requirements. No matter if you have a zero tolerance requirement for drilling precision optics, or standard drilling of granite. We can help you get the most value for your money. Find out more >>>

Diamond Core Drills for any application